Saltar al contenido principal
Inglés
Español
Paso 3
Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets. Make sure you are flipping up the white retaining flaps, not the black sockets themselves. Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.
  • Use the flat end of a spudger to carefully flip up the retaining flaps on the digitizer ribbon cable ZIF sockets.

  • Make sure you are flipping up the white retaining flaps, not the black sockets themselves.

  • Use the tip of a spudger to pull the digitizer ribbon cable straight out of its socket.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.