Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 6

Paso 6
Use a finger to lift the plastic locking flaps that hold the remaining three (3) ribbon cables in place. Remove the cables from their terminals by slipping them away from their connectors. The black line on the ribbon cables mark the connecting region. When reinstalling, insert the cable up to this line so the locking flap covers it.
  • Use a finger to lift the plastic locking flaps that hold the remaining three (3) ribbon cables in place.

  • Remove the cables from their terminals by slipping them away from their connectors.

  • The black line on the ribbon cables mark the connecting region. When reinstalling, insert the cable up to this line so the locking flap covers it.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.