Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Loosen the three ribbon cables that are attached to the motherboard by grabbing the tabs on the side of the ribbon cables' connectors and pulling gently outwards. Fully detach the same three ribbon cables by grabbing each cable with tweezers and sliding them outwards horizontally. Fully detach the same three ribbon cables by grabbing each cable with tweezers and sliding them outwards horizontally.
  • Loosen the three ribbon cables that are attached to the motherboard by grabbing the tabs on the side of the ribbon cables' connectors and pulling gently outwards.

  • Fully detach the same three ribbon cables by grabbing each cable with tweezers and sliding them outwards horizontally.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.