Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 3

Paso 3
Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear. Lift the sensor array away from the rest of the Vive until the camera cable tugs back and hold it in place. The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out horizontally.
  • Be careful not to lift the sensor array too far from the rest of the device because the camera ribbon cable may tear.

  • Lift the sensor array away from the rest of the Vive until the camera cable tugs back and hold it in place.

  • The camera ribbon cable must be pulled out of its socket vertically, as opposed to all other ribbon cables which slide out horizontally.

  • Disconnect the camera by lifting its ribbon cable up and away from the motherboard using a pair of ESD safe tweezers.

  • Lift the sensor array upwards away from the motherboard to separate the array from the device fully.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.