Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Orient the Vive so that the camera is facing towards you and the connector ports are facing upwards. There are four screws you need to remove that are covered with small black stickers (two on top, two on bottom). Use a plastic opening tool to gently pry up the left side of the outer sheath.
  • Orient the Vive so that the camera is facing towards you and the connector ports are facing upwards.

  • There are four screws you need to remove that are covered with small black stickers (two on top, two on bottom).

  • Use a plastic opening tool to gently pry up the left side of the outer sheath.

  • If the left sheath is glued down, slide your plastic opening tool along the middle seam to break the bond.

  • Slide the left side of the sheath outwards.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.