Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 45 guías que incluyen este paso.

Inglés
Italiano
Paso 2
Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
  • Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.

  • Be sure to push parallel to the board, first on one side, then the other, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

Usa la punta di uno spudger per spingere via dalla sua sede sulla scheda logica il connettore del cavo della fotocamera.

Accertati di spingere parallelamente alla scheda, prima da un lato e poi dall'altro, per far "camminare" il connettore fuori dalla sua sede.

[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.
[* black] Use the tip of a spudger to push the camera cable connector toward the fan and out of its socket on the logic board.
[* icon_noteicon_caution] Be sure to push parallel to the board, pushing first on one side, then the otherother, to slowly "walk" the connector out of its socket. Do not pry up, or you will damage the socket.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.