Saltar al contenido principal
Inglés
Español

Traduciendo paso 23

Paso 23
Grab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught. When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its copper heat sink attached to the midplane.
  • Grab the logic board from both edges and lift it out of the midplane, minding any cables that may get caught.

  • When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its copper heat sink attached to the midplane.

  • We have a thermal paste guide that makes applying thermal paste a snap.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.