Saltar al contenido principal
Inglés
Español
Paso 7
Put the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.
  • Put the assembly back into place (without screwing it in), and verify that the actuator pole hits the screws at a good location.

  • Adjust the length of screws if needed.

  • Put everything back together in reverse order, including all the screws you took out.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.