Saltar al contenido principal
Inglés
Español
Paso 2
Working from alternating sides of the board, use the flat end of a spudger to separate the optical drive connector board from the optical drive.
  • Working from alternating sides of the board, use the flat end of a spudger to separate the optical drive connector board from the optical drive.

  • The socket in the optical drive is particularly deep, so don't pry the connector up too far from one side to avoid shearing the connector off the board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.