Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 21
Carefully peel the shielding sticker from the upper shell. Note that you can't remove it all the way until you remove three screws. Using a Phillips #000 driver, remove the three screws that are mounting the board to the upper drone shell.
Shielding
  • Carefully peel the shielding sticker from the upper shell. Note that you can't remove it all the way until you remove three screws.

  • Using a Phillips #000 driver, remove the three screws that are mounting the board to the upper drone shell.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.