Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 17
Using a knife or flathead screwdriver, remove the melted plastic rivets holding down the LED board.  Be careful to not damage the LED. Carefully pry up the LED board from the drone shell.
LED Rivets
  • Using a knife or flathead screwdriver, remove the melted plastic rivets holding down the LED board. Be careful to not damage the LED.

  • Carefully pry up the LED board from the drone shell.

  • Repeat on all four wings.

  • During reassembly use a dull soldering iron tip to remount the LED board to the new shell.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.