Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 2
Apply some high concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.
  • Apply some high concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

  • The battery adhesive is designed to be loosened with isopropyl alcohol.

  • Alternatively, prepare an iOpener and apply it directly to the battery for at least two minutes. Reheat and reapply the iOpener as needed.

Aplica un poco de alcohol isopropílico concentrado (> 90 %) debajo de cada esquina de la batería y permite que penetre durante varios minutos para ayudar a debilitar el adhesivo.

Alternativamente, prepara un iOpener y aplícalo directamente sobre la batería durante al menos dos minutos. Vuelve a calentar y aplicar el iOpener si fuera necesario.

[* black] Apply some high concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.
[* icon_note] The battery adhesive is designed to be loosened with isopropyl alcohol.
[* black] Alternatively, [guide|25705|prepare an iOpener|new_window=true] and apply it directly to the battery for at least two minutes. Reheat and reapply the iOpener as needed.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.