Saltar al contenido principal
Inglés
Español
Paso 3
Flip the camera over to the side with the LCD screen. Gently remove the plastic cover that borders the LCD screen starting with the top left corner, then the bottom left corner, and finally the bottom and top right corners. The LCD screen is now loose from the camera; it should only be connected by a gold strip that attaches to the circuit board.
  • Flip the camera over to the side with the LCD screen.

  • Gently remove the plastic cover that borders the LCD screen starting with the top left corner, then the bottom left corner, and finally the bottom and top right corners.

  • The LCD screen is now loose from the camera; it should only be connected by a gold strip that attaches to the circuit board.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.