Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Japonés
Paso 6
Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell. You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
  • Apply a few drops of adhesive remover evenly along the elevated edge of the outer right battery cell.

  • You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.

高く持ち上げられた右側のバッテリー外側縁に沿って、少量の接着剤リムーバーを数的、均等に塗布します。

多量に流し込む必要はありません。小さなボトルにはここに搭載された全バッテリーセルを外す量の、倍の量が入っています。

次の段階に進む前に、液体の接着剤リムーバーがバッテリーの下に浸透するまで、2-3分待ちます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.