Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
After removal of the LCD screen and ribbon cable the camera sensor can be accessed. Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.
  • After removal of the LCD screen and ribbon cable the camera sensor can be accessed.

  • Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.

  • Gently pry the black tabs on both cables until they are flipped up.

  • Gently pull the ribbon cables until they slide out of the connectors.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.