Saltar al contenido principal
Inglés
Español

Traduciendo paso 2

Paso 2
Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case. Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.
  • Lift the display data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.

  • Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.