Saltar al contenido principal
Inglés
Español
Paso 8
Let's undo some cables! Disconnect the ribbon from the ZIF (Zero Insertion Force) connector by flipping up the small black flap with a spudger or fingernail and removing the cable using the blue tab to pull away. Undo both bundled cable connectors by  pulling collectively on the wires and helping it along with a spudger to disconnect.
  • Let's undo some cables!

  • Disconnect the ribbon from the ZIF (Zero Insertion Force) connector by flipping up the small black flap with a spudger or fingernail and removing the cable using the blue tab to pull away.

  • Undo both bundled cable connectors by pulling collectively on the wires and helping it along with a spudger to disconnect.

  • Once the cables are disconnected, unthread the cables from their grooved paths in the upper housing.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.