Saltar al contenido principal
Inglés
Italiano

Traduciendo paso 1

Paso 1
Insert the loop of the short cord through eyelet from the rear of the pedal Pass cord down and under rear black pulley, and attach spring to loop.
  • Insert the loop of the short cord through eyelet from the rear of the pedal Pass cord down and under rear black pulley, and attach spring to loop.

  • The eyelet is located under the top plate, toward front of the pedal.

  • Place the cord inside the pedal, under the main cross shaft, and let it lie there for now.

  • Move the pedal to the “toe-up” position.

  • Insert the loop of the long cord through the rear side of eyelet toward the front of the pedal.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.