Saltar al contenido principal
Inglés
Español
Paso 2
Loosen the bolts of the stem with the torque wrench and remove its faceplate completely. Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body. Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.
Bar montage
  • Loosen the bolts of the stem with the torque wrench and remove its faceplate completely.

  • Take a bit of the assembly paste and apply a thin layer of it on the inner side of the faceplate as well as in the clamping area of the stem body.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.