Saltar al contenido principal
Inglés
Chino
Paso 6
Locate the AirPort card at the top center of the logic board and just below the hard drive. Use the flat end of a spudger to gently pry each of the antenna cables off their sockets.
  • Locate the AirPort card at the top center of the logic board and just below the hard drive.

  • Use the flat end of a spudger to gently pry each of the antenna cables off their sockets.

  • Do not disconnect the antennas by pulling on the cables as this may damage the cables, connectors, or sockets.

  • The antennas have markings to help you identify their order. The antenna with no marks goes to "CH0", the antenna with one mark goes to "CH1", and the antenna with two marks goes to "CH2".

找到位于逻辑板顶部中心的AirPort卡,在硬盘的正下方。

使用撬棒的平端轻轻地将每根天线电路从其插槽上撬开。

请勿通过拉扯电缆来断开天线,否则可能会损坏电路,连接器或插槽。

天线有标记可以帮助您识别其顺序。 没有标记的天线到“CH0”,一个标记的天线到“CH1”,两个标记的天线到“CH2”。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.