-
Locate the AirPort card at the top center of the logic board and just below the hard drive.
-
Use the flat end of a spudger to gently pry each of the antenna cables off their sockets.
-
Do not disconnect the antennas by pulling on the cables as this may damage the cables, connectors, or sockets.
-
The antennas have markings to help you identify their order. The antenna with no marks goes to "CH0", the antenna with one mark goes to "CH1", and the antenna with two marks goes to "CH2".
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.
Atajos de Teclado para Edicion de Pasos de Guia:
Ctrl + Shift + N
Inserta una nueva línea debajo
Ctrl + Shift + P
Inserta una línea encima
Ctrl + ]
Sangrar línea actual
Ctrl + [
Desangrar línea actual
Ctrl + D
Eliminar línea actual
Shift + ;
Navegar al siguiente paso.
Shift + H
Navegar al paso anterior.
Ver todos los atajos