Saltar al contenido principal
Inglés
Chino
Paso 13
Locate the IR sensor located behind the black Apple logo. If necessary, peel back the tape covering the IR sensor.
  • Locate the IR sensor located behind the black Apple logo.

  • If necessary, peel back the tape covering the IR sensor.

  • Detach the IR sensor by pulling it straight up and out from the case.

  • Do not attempt to completely remove the IR sensor from the iMac as it is still attached to the logic board.

找到位于黑色Apple徽标后面的IR传感器。

如果需要,剥离覆盖红外传感器的胶带。

通过将红外传感器向上拉出并从外壳中移除。

请勿尝试将红外线传感器从iMac移除,因为它仍旧连在主板上。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.