Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Alemán
Paso 3
Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts. Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts. Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts.
  • Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts.

Schiebe nun das Plektron Richtung Kameragehäuse und trenne so den Kleber, der das Kabel am Front Panel festhält. Stoppe kurz vor dem Gewinde.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.