Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Inglés
Español
Paso 2
There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal. Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller. Remove the 2 internal screws and remove the controller board.
Disassemble the Controller
  • There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal.

  • Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller.

  • Remove the 2 internal screws and remove the controller board.

  • Remove the 3 rubber pads and all the buttons from the front controller cover and controller board and set them off to the side for now.

  • I put the 8 screws in a container with enough rubbing alcohol to submerge them. This removes years of dirt and they come out looking like new. This is completely optional.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.