Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Francés

Traduciendo paso 1

Paso 1
The computer should be turned off before starting. In addition, the laptop should remain closed throughout the duration of this replacement, unless otherwise noted. Before handling any electronic components, you should ground yourself. This will prevent damage to the components from any charge you may be carrying. You can do this by touching any metal objects.
  • The computer should be turned off before starting. In addition, the laptop should remain closed throughout the duration of this replacement, unless otherwise noted.

  • Before handling any electronic components, you should ground yourself. This will prevent damage to the components from any charge you may be carrying. You can do this by touching any metal objects.

  • Flip your laptop so that the bottom of the laptop facing up and hinges of the screen are closest to you as shown in the image.

L’ordinateur doit être arrêté avant de commencer. De plus, l’ordinateur portable doit rester fermé pendant toute la durée du remplacement, sauf indication contraire.

Avant de tenir un quelconque composant électronique, vous devez être relié à la terre. Cela évitera d’endommager le composant à cause d’une charge d’électricité statique que vous pourriez transporter. Vous pouvez le faire en touchant n’importe quel objet métallique.

Retournez votre ordinateur portable de sorte que le dessous soit face à vous.

Assurez-vous que vous pouvez lire l’étiquette en dessous. Si l’étiquette est à l’envers, vous pourriez avoir besoin de repositionner l’ordinateur de sorte que vous puissiez la lire facilement. Comme alternative, les charnières de l’écran doivent être orientées vers vous.

[* icon_caution] The computer should be turned off before starting. In addition, the laptop should remain closed throughout the duration of this replacement, unless otherwise noted.
[* icon_caution] Before handling any electronic components, you should ground yourself. This will prevent damage to the components from any charge you may be carrying. You can do this by touching any metal objects.
[* black] Flip your laptop suchso that the bottom of the laptop is facing up.
[* black] Make sure you can read
up and hinges of the label on the bottom part. If the label is upside down, you will needscreen are closest to re-position the laptop until you can properly read it. As an alternative,as shown in the hinges for the screen should be facing towards youimage.
[* black] Flip your laptop suchso that the bottom of the laptop is facing up.
[* black] Make sure you can read
up and hinges of the label on the bottom part. If the label is upside down, you will needscreen are closest to re-position the laptop until you can properly read it. As an alternative,as shown in the hinges for the screen should be facing towards youimage.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.