Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Español
Paso 2
Using a Phillips #0 screwdriver,  remove the four 10mm screws located at the back of the device. Using a Phillips #0 screwdriver,  remove the four 10mm screws located at the back of the device. Using a Phillips #0 screwdriver,  remove the four 10mm screws located at the back of the device.
  • Using a Phillips #0 screwdriver, remove the four 10mm screws located at the back of the device.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.