Menú

Tus configuraciones

Volver a la Guía
Inglés
Español
Paso 6
You must push in these buttons (7 in total) It is nearly impossible to not mess up the plastic using a screwdriver, i would recommend using an x-acto knife This was one of the harder steps, you must push the button in until it clicks and then go farther still
Removing the back of the casing

  • You must push in these buttons (7 in total)

  • It is nearly impossible to not mess up the plastic using a screwdriver, i would recommend using an x-acto knife

  • This was one of the harder steps, you must push the button in until it clicks and then go farther still

  • Make sure you keep pressure applied outwards so that the locks do not re-engage

Añadir un título

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.