Saltar al contenido principal
Inglés
Español
Paso 20
Carefully align the bezel tooling pin into in the tooling holes at the top of the display assembly.  Set the bezel in place and apply pressure. Pull the rest of the red backing strips to expose the adhesive to the rest of the bezel. While applying pressure with the flat side of the spudger, rub around the entire bezel to ensure the adhesive sets properly.
  • Carefully align the bezel tooling pin into in the tooling holes at the top of the display assembly. Set the bezel in place and apply pressure.

  • Pull the rest of the red backing strips to expose the adhesive to the rest of the bezel.

  • While applying pressure with the flat side of the spudger, rub around the entire bezel to ensure the adhesive sets properly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.