Saltar al contenido principal
Inglés
Español

Traduciendo paso 1

Paso 1
At the bottom right corner of the screen, insert the pointed side of spudger between the bezel and wide, flat part of rubber bumper.  Pull the bumper towards to hinge to release the adhesive. Then place the flat side of the spudger between bezel and bumper at the same location, slip the spudger underneath the bumper and lift.
  • At the bottom right corner of the screen, insert the pointed side of spudger between the bezel and wide, flat part of rubber bumper. Pull the bumper towards to hinge to release the adhesive.

  • Then place the flat side of the spudger between bezel and bumper at the same location, slip the spudger underneath the bumper and lift.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.