Saltar al contenido principal
Inglés
Español

Traduciendo paso 3

Paso 3
Lift the connector, using the Blunt Tweezers, while tugging on the speaker's wire. Plug the new speaker in by clipping the   connector into place where the old connector was removed from.
  • Lift the connector, using the Blunt Tweezers, while tugging on the speaker's wire.

  • Plug the new speaker in by clipping the connector into place where the old connector was removed from.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.