Saltar al contenido principal
Inglés
Español
Paso 2
Use the tweezers to grasp the housing firmly and pull it away from the three ribbon cables.
  • Use the tweezers to grasp the housing firmly and pull it away from the three ribbon cables.

  • Pull the battery housing until the half circle grooves on the back housing match up with the grooves on the battery housing.

  • After the screws have been removed from the inside, the battery housing is only held down by adhesive.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.