Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Español
Paso 5
With the flat end of a spudger, flip up the black flap on the display's ZIF connector. Insert the pointed end of the spudger between the cable and the motherboard and gently pull the cable straight out of the connector. During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap.
  • With the flat end of a spudger, flip up the black flap on the display's ZIF connector.

  • Insert the pointed end of the spudger between the cable and the motherboard and gently pull the cable straight out of the connector.

  • During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.