Saltar al contenido principal
Inglés
Español
Paso 35
When you are satisfied with the smoothness and fill of the crevice, allow the case and plastic to cool for approx 10-15 minutes. The plastic filler will become a milky white color when it is fully solidified. Repeat steps 29 through 35 for all of the crevices created from cutting the case.
  • When you are satisfied with the smoothness and fill of the crevice, allow the case and plastic to cool for approx 10-15 minutes. The plastic filler will become a milky white color when it is fully solidified.

  • Repeat steps 29 through 35 for all of the crevices created from cutting the case.

  • It is highly recommended that you leave the old power inlet hole unsealed to allow some cooling for your new power supply.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.