Saltar al contenido principal
Inglés
Español
Paso 13
Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
  • Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.

  • Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.

  • Solder the resistor to the PCB and clip off the excess leads.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.