Saltar al contenido principal
Inglés
Español
Paso 2
Use a metal spudger or prying device to begin levering the case halves apart. Do not push the prying device too far into the case, as this could damage the EMI shields or other components. The case will be most stubborn near the grey power inlet, as this piece is glued to the case halves. Focus on separating the other parts of the case first.
  • Use a metal spudger or prying device to begin levering the case halves apart.

  • Do not push the prying device too far into the case, as this could damage the EMI shields or other components.

  • The case will be most stubborn near the grey power inlet, as this piece is glued to the case halves. Focus on separating the other parts of the case first.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.