Saltar al contenido principal
Inglés
Español

Traduciendo paso 10

Paso 10
Tighten the outer two screws along the inner edge of the trackpad and check the alignment of it on the outer side of the upper case.
  • Tighten the outer two screws along the inner edge of the trackpad and check the alignment of it on the outer side of the upper case.

  • If its alignment looks good, install the rest of the Tri-point screws along the inner edge of the trackpad.

  • Before reassembling your machine, verify that the set screw is still installed in a position so the mouse will click correctly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.