Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
-
Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up. |
[* black] Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up. |
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board. |
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.