Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Chino
Paso 3
If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning. Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.
  • If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.

  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

如果这是你首次移除iPhone电池的胶条,请在开始前参考视频中的如下步骤。

尽量确保整个过程中胶条平整不皱起;皱起的胶条容易相互贴在一起而破裂以致不能干净的将胶条拉出。

慢慢地将一块电池胶片朝iPhone的底部方向从电池中拉出,。

拉的时候要平稳用力,保持胶条上的恒定张力,直到其从电池和后壳体之间滑出。 为了获得最佳效果,请以60º或更小的角度拉胶条。

该胶条将延伸到其原始长度的许多倍。 如果需要,继续拉动并重新抓住电池附近的胶条再拉。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.