Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a la guía que incluye este paso.

Inglés
Japonés

Traduciendo paso 2

Paso 2
Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case. Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it. Lift the hard drive retaining bracket up and out of the computer.
  • Remove the two 8.2 mm T6 Torx screws securing the hard drive retaining bracket to the lower case.

  • Use a spudger if the hard drive ribbon cable is firmly glued to the top of the drive. You might have to work slowly in order to not damage it.

  • Lift the hard drive retaining bracket up and out of the computer.

  • Lift up the hard drive with one hand and use your other hand to disconnect the hard drive cable.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.