Saltar al contenido principal
Inglés
Español
Paso 22
Attach the other end of your new cable to the logic board where the optical drive was connected.
  • Attach the other end of your new cable to the logic board where the optical drive was connected.

  • Carefully wrap up the extra cable and store it to the side of the hard drive.

  • Getting everything to fit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the way, and could also damage the hard drives.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.