Saltar al contenido principal
Inglés
Español
Paso 15
Flip over the internal framework with the newly attached drive. It should look like the first picture Prepare the bottom housing for connection with the internal framework by connecting the antenna cables to the Broadcom AirPort card as shown Arranging the antennas as pictured will ensure a smooth connection of the two large components
  • Flip over the internal framework with the newly attached drive. It should look like the first picture

  • Prepare the bottom housing for connection with the internal framework by connecting the antenna cables to the Broadcom AirPort card as shown

  • Arranging the antennas as pictured will ensure a smooth connection of the two large components

  • When setting the internal framework into the bottom housing, make sure the male connector on the interconnect board finds its way into the female connector on the logic board

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.