Saltar al contenido principal
Inglés
Español
Paso 14
Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. Your newly-installed drive should look very similar to the third picture.
  • Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place.

  • Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive.

  • Your newly-installed drive should look very similar to the third picture.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.