Saltar al contenido principal
Inglés
Español
Paso 13
Hold the new drive in place and attach it to the frame using the four Phillips screws. Plug the interconnect board into the new drive, making sure that all wires are in their original place. Route the black thermal sensor wire back through the notch.
  • Hold the new drive in place and attach it to the frame using the four Phillips screws.

  • Plug the interconnect board into the new drive, making sure that all wires are in their original place.

  • Route the black thermal sensor wire back through the notch.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.