Saltar al contenido principal
Inglés
Español
Paso 12
Unplug the interconnect board from the hard drive. The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board. Remove the four Phillips screws that hold the drive in place.
  • Unplug the interconnect board from the hard drive.

  • The interconnect board is still held in place by other connectors. Make sure that the they are not separated from the interconnect board.

  • Remove the four Phillips screws that hold the drive in place.

  • The stock hard drive can now be removed.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.