Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés
Español
Paso 4
Disclaimer: The Galaxy Tab we acquired already had a shattered front glass panel. However, the procedure outlined in this guide is identical for both intact/shattered front panels. Insert a plastic opening tool near the bottom left edge of the rear case.
  • Disclaimer: The Galaxy Tab we acquired already had a shattered front glass panel. However, the procedure outlined in this guide is identical for both intact/shattered front panels.

  • Insert a plastic opening tool near the bottom left edge of the rear case.

  • Use your plastic opening tool to gently create a small gap between the front panel and the rear panel near the bottom left edge.

  • Run the plastic opening tool along the left side of the perimeter to create a bigger gap between the front panel and the rear panel.

  • Insert two guitar picks into the small gap created by the plastic opening tool.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.