Saltar al contenido principal
Inglés
Español
Paso 2
Once the cover is off, the controller should look like this. Follow the red and black wire(s) from the battery to the connector. Take a pair of small pliers and unhook the battery (refer to picture 2 of this step to see it unhooked). The battery will simply lift out revealing the motherboard (refer to picture 3 ots).
Unhooking the battery
  • Once the cover is off, the controller should look like this. Follow the red and black wire(s) from the battery to the connector.

  • Take a pair of small pliers and unhook the battery (refer to picture 2 of this step to see it unhooked).

  • The battery will simply lift out revealing the motherboard (refer to picture 3 ots).

  • From here, the plastic holding the battery will be able to lifted out.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.