Saltar al contenido principal
Inglés
Español
Paso 12
reattach the leads starting with the central (white) strand directly to the PCB
  • reattach the leads starting with the central (white) strand directly to the PCB

  • Then solder one strand of the shield to the opposite side of the circuit board

  • Flip the plug over and solder the remaining end of the shield to the opposite side

  • Hint: The goal here is to make sure that the divided shield distributes any strain equally between front and rear sides and avoids straining the central wire

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.