Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 40 guías que incluyen este paso.

Inglés
Francés

Traduciendo paso 1

Paso 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Retirez les cinq vis cruciformes suivantes, qui maintiennent le support inférieur en place :

Quatre vis de 3,2 mm

Une vis de 1,7 mm

Vous devrez peut-être décoller l'adhésif de l'écran sur le bord inférieur du boîtier de l'iMac pour accéder aux vis.

[* black] Remove the following five Phillips screws holding the lower support bracket in place:
[* red] Four 3.2 mm screws
[* orange] One 1.7 mm screw
+ [* icon_note] On at least some EMC 2544 machines, all five screws are the same size.
[* icon_note] You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.