Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 30
Insert an opening pick underneath  the logic board at the corner of the large EMI shield. Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place. Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place.
  • Insert an opening pick underneath the logic board at the corner of the large EMI shield.

  • Slide the pick upwards until you reach the battery connector to break up the adhesive holding the logic board in place.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.