Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español
Paso 4
Open 1 quart of oil. Pour it into the filter until the filter is about 1/2 full. Apply a small amount of clean oil to the rubber gasket on the new oil filter. Wipe down the oil filter mounting area, and any oil residue that has run down onto the motorcycle.
Installing the New Oil Filter
  • Open 1 quart of oil. Pour it into the filter until the filter is about 1/2 full.

  • Apply a small amount of clean oil to the rubber gasket on the new oil filter.

  • Wipe down the oil filter mounting area, and any oil residue that has run down onto the motorcycle.

  • Make sure that the old gasket came off with the filter, and you have a clean smooth surface to install the new filter on.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.